We can quote carbon steel bars against your drawing or material specification. Our grade range includes options for general fabrication and more demanding machine parts.
| Grade | Typical reason to choose it |
|---|---|
| 1018 / 1020 | Parts needing machining, forming or welding |
| 1045 | Shafts and pins with specified strength or hardening needs |
| 1050 | Parts needing greater hardness after suitable heat treatment |
Tell us if the part will be welded or hardened later. We can check the supply options around those steps. A higher-carbon grade is not automatically a better choice for a welded part.
Full Bars or Pieces Prepared for Your Shop
We offer full bars and cut lengths. We can also quote drilling, slotting and tapping from your drawing.
For repeat parts, cut pieces can save saw time and reduce handling. Holes or slots completed before delivery can remove further work from your shop.
We confirm the blank size and agreed processing in the quotation. If the ends need facing later, the cut length can include that allowance.
Pay for the Finish You Need
We can review hot-rolled or cold-drawn stock for your order. Hot-rolled bar can keep costs down when you will machine away the outer surface. Cold-drawn stock can reduce finishing work where closer starting dimensions are useful.
For outdoor parts, we can also quote galvanizing with the agreed fabrication work. Carbon steel needs suitable protection where moisture can cause rust.
Send us the required grade, dimensions and quantity. We can quote the material and processing together.
